
****************************************************************************
*                                                                          *
*                         The Ethernet Adapter                             *
*                                                                          *
*                ODI Driver for NetWare 3.12/4.0x Servers                  *
*                                                                          *
*                               Ver. 3.03                                  *
*                                                                          *
*                              README file                                 **                                                                          *
****************************************************************************

1. Introduction

   Ethernet ODI Driver for NetWare 3.12/4.0x Server conforms to Novell Net-
   Ware 386 public domain Open Data-Link Interface (ODI), a specification
   jointly designed by Novell and Apple.  It is apply for the NetWare 3.12/
   4.0x Server.


2. Contents of the Subdirectory

      RETH.LAN         NetWare 3.12/4.0x ODI Server Driver for the ISA
                       Ethernet Card.


3. Installation


   1) Install and configure the Ethernet card on your ISA PC system by fol-
      lowing the procedure in your jumperless Ethernet installation manual.

   2) Install NetWare v3.12/v4.0x Server according to the manual.

   3) Insert the Distribution Diskette into drive A (if you use a different
      disk drive, substitute the appropriate drive letter in the following
      procedure).

   4) At the DOS prompt, type as follows:

            CD \NETWARE
            SERVER

   5) On the server console, load RETH.LAN.  You may specify the frame type
      and the slot number. For example:

       LOAD A:RETH.LAN FRAME=Ethernet_802.2


   6) Bind IPX to RETH by typing the following command:

               BIND IPX RETH

   7) If you want to load RETH.LAN from the hard disk directly in the future,
      set up a workstation to connect to this server, then copy RETH.LAN
      from the Distribution Diskette to the subdirectory SYS:\SYSTEM on the
      server.

